README.md

OpenVLex Gluing Stencils

About

Stencils for easier and more accurate gluing of OpenVLex jacks onto the underside of tiles.

Instructions

As a basic set, print one 1x1, one 2x1 and one 2x2 stencil. This should cover 90% of your OpenVLex tiles. Remember that the purpose of OpenVLex is to prevent the need for exotic tile sizes.

Usage

1. Place the jacks

2. Put glue on the jacks

3. Place the tile

4. Use clamps until glue is dry (but not too long)

Note: Keeping the parts upside down during drying prevents glue from dripping onto the stencil

5. Place stencil on disassembly plate and push down corners

6. Use your tile in the most VLexible ways

Printing Notes

• Material: PLA or PETG
• Nozzle: 0.4 mm
• Layer height: 0.10 mm or 0.15 mm
• Fill Density: 10% to 15%