Starting from version 1.5.0 I can't compile my project for 4.3inch_ESP32 8048S043

[javidombla]

\Arduino\libraries\GFX_Library_for_Arduino\src\databus\Arduino_ESP32QSPI.cpp:59:21: error: 'ESP_INTR_CPU_AFFINITY_AUTO' was not declared in this scope
.isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
^~~~~~~~~~~~~~~~~~~~~~~~~~
\Arduino\libraries\GFX_Library_for_Arduino\src\databus\Arduino_ESP32QSPI.cpp:59:21: note: suggested alternative: 'ESP_ETH_PHY_ADDR_AUTO'
.isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
^~~~~~~~~~~~~~~~~~~~~~~~~~
ESP_ETH_PHY_ADDR_AUTO
\libraries\GFX_Library_for_Arduino\src\databus\Arduino_ESP32QSPI.cpp:60:22: error: 'spi_bus_config_t' has no non-static data member named 'isr_cpu_id'
.intr_flags = 0};
^
\libraries\GFX_Library_for_Arduino\src\databus\Arduino_ESP32QSPI.cpp:73:23: error: 'SPI_CLK_SRC_DEFAULT' was not declared in this scope
.clock_source = SPI_CLK_SRC_DEFAULT,
^~~~~~~~~~~~~~~~~~~
\Arduino\libraries\GFX_Library_for_Arduino\src\databus\Arduino_ESP32RGBPanel.cpp: In member function 'uint16_t* Arduino_ESP32RGBPanel::getFrameBuffer(int16_t, int16_t)':
\Arduino\libraries\GFX_Library_for_Arduino\src\databus\Arduino_ESP32RGBPanel.cpp:93:3: error: 'esp_lcd_rgb_panel_config_t::' has no non-static data member named 'refresh_on_demand'
};
^
\Arduino\libraries\GFX_Library_for_Arduino\src\databus\Arduino_ESP32QSPI.cpp:73:23: note: suggested alternative: 'LCD_CLK_SRC_XTAL'
.clock_source = SPI_CLK_SRC_DEFAULT,
^~~~~~~~~~~~~~~~~~~
LCD_CLK_SRC_XTAL
\Arduino\libraries\GFX_Library_for_Arduino\src\databus\Arduino_ESP32QSPI.cpp:83:25: error: 'spi_device_interface_config_t' has no non-static data member named 'clock_source'
.post_cb = nullptr};
^

My code:

#define GFX_BL DF_GFX_BL // default backlight pin, you may replace DF_GFX_BL to actual backlight pin
#define TFT_BL 2
//#define GFX_BL 2
/* More dev device declaration: https://github.com/moononournation/Arduino_GFX/wiki/Dev-Device-Declaration */

/* More data bus class: https://github.com/moononournation/Arduino_GFX/wiki/Data-Bus-Class */
//Arduino_DataBus *bus = create_default_Arduino_DataBus();

/* More display class: https://github.com/moononournation/Arduino_GFX/wiki/Display-Class */
//Arduino_GFX gfx = new Arduino_ILI9341(bus, DF_GFX_RST, 0 / rotation /, false / IPS */);

Arduino_ESP32RGBPanel rgbpanel = new Arduino_ESP32RGBPanel(
40 / DE /, 41 / VSYNC /, 39 / HSYNC /, 42 / PCLK /,
45 / R0 /, 48 / R1 /, 47 / R2 /, 21 / R3 /, 14 / R4 /,
5 / G0 /, 6 / G1 /, 7 / G2 /, 15 / G3 /, 16 / G4 /, 4 / G5 /,
8 / B0 /, 3 / B1 /, 46 / B2 /, 9 / B3 /, 1 / B4 /,
0 / hsync_polarity /, 8 / hsync_front_porch /, 4 / hsync_pulse_width /, 8 / hsync_back_porch /,
0 / vsync_polarity /, 8 / vsync_front_porch /, 4 / vsync_pulse_width /, 8 / vsync_back_porch /,
1 / pclk_active_neg /, 16000000 / prefer_speed */, true
);

// ST7262 IPS LCD 800x480
Arduino_RGB_Display gfx = new Arduino_RGB_Display(
800 / width /, 480 / height */, rgbpanel);