Replace Greek 'μ' with micro 'µ'

.github/actions/odd-resource-analysis/dist/index.js

@@ -31667,7 +31667,7 @@ module.exports = {
   "cp1252": "windows1252",
   "windows1253": {
     "type": "_sbcs",
-    "chars": "€�‚ƒ„…†‡�‰�‹�����‘’“”•–—�™�›���� ΅Ά£¤¥¦§¨©�«¬­®―°±²³΄µ¶·ΈΉΊ»Ό½ΎΏΐΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡ�ΣΤΥΦΧΨΩΪΫάέήίΰαβγδεζηθικλμνξοπρςστυφχψωϊϋόύώ�"
+    "chars": "€�‚ƒ„…†‡�‰�‹�����‘’“”•–—�™�›���� ΅Ά£¤¥¦§¨©�«¬­®―°±²³΄µ¶·ΈΉΊ»Ό½ΎΏΐΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡ�ΣΤΥΦΧΨΩΪΫάέήίΰαβγδεζηθικλµνξοπρςστυφχψωϊϋόύώ�"
   },
   "win1253": "windows1253",
   "cp1253": "windows1253",
@@ -31733,7 +31733,7 @@ module.exports = {
   "cp28596": "iso88596",
   "iso88597": {
     "type": "_sbcs",
-    "chars": "€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ ‘’£€₯¦§¨©ͺ«¬­�―°±²³΄΅Ά·ΈΉΊ»Ό½ΎΏΐΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡ�ΣΤΥΦΧΨΩΪΫάέήίΰαβγδεζηθικλμνξοπρςστυφχψωϊϋόύώ�"
+    "chars": "€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ ‘’£€₯¦§¨©ͺ«¬­�―°±²³΄΅Ά·ΈΉΊ»Ό½ΎΏΐΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡ�ΣΤΥΦΧΨΩΪΫάέήίΰαβγδεζηθικλµνξοπρςστυφχψωϊϋόύώ�"
   },
   "cp28597": "iso88597",
   "iso88598": {
@@ -31784,7 +31784,7 @@ module.exports = {
   "csibm437": "cp437",
   "cp737": {
     "type": "_sbcs",
-    "chars": "ΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡΣΤΥΦΧΨΩαβγδεζηθικλμνξοπρσςτυφχψ░▒▓│┤╡╢╖╕╣║╗╝╜╛┐└┴┬├─┼╞╟╚╔╩╦╠═╬╧╨╤╥╙╘╒╓╫╪┘┌█▄▌▐▀ωάέήϊίόύϋώΆΈΉΊΌΎΏ±≥≤ΪΫ÷≈°∙·√ⁿ²■ "
+    "chars": "ΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡΣΤΥΦΧΨΩαβγδεζηθικλµνξοπρσςτυφχψ░▒▓│┤╡╢╖╕╣║╗╝╜╛┐└┴┬├─┼╞╟╚╔╩╦╠═╬╧╨╤╥╙╘╒╓╫╪┘┌█▄▌▐▀ωάέήϊίόύϋώΆΈΉΊΌΎΏ±≥≤ΪΫ÷≈°∙·√ⁿ²■ "
   },
   "ibm737": "cp737",
   "csibm737": "cp737",
@@ -31874,7 +31874,7 @@ module.exports = {
   "csibm866": "cp866",
   "cp869": {
     "type": "_sbcs",
-    "chars": "������Ά�·¬¦‘’Έ―ΉΊΪΌ��ΎΫ©Ώ²³ά£έήίϊΐόύΑΒΓΔΕΖΗ½ΘΙ«»░▒▓│┤ΚΛΜΝ╣║╗╝ΞΟ┐└┴┬├─┼ΠΡ╚╔╩╦╠═╬ΣΤΥΦΧΨΩαβγ┘┌█▄δε▀ζηθικλμνξοπρσςτ΄­±υφχ§ψ΅°¨ωϋΰώ■ "
+    "chars": "������Ά�·¬¦‘’Έ―ΉΊΪΌ��ΎΫ©Ώ²³ά£έήίϊΐόύΑΒΓΔΕΖΗ½ΘΙ«»░▒▓│┤ΚΛΜΝ╣║╗╝ΞΟ┐└┴┬├─┼ΠΡ╚╔╩╦╠═╬ΣΤΥΦΧΨΩαβγ┘┌█▄δε▀ζηθικλµνξοπρσςτ΄­±υφχ§ψ΅°¨ωϋΰώ■ "
   },
   "ibm869": "cp869",
   "csibm869": "cp869",
@@ -31942,7 +31942,7 @@ module.exports = {
   },
   "macgreek": {
     "type": "_sbcs",
-    "chars": "Ĺ²É³ÖÜ΅àâä΄¨çéèê룙î‰ôö¦­ùûü†ΓΔΘΛΞΠß®©ΣΪ§≠°·Α±≤≥¥ΒΕΖΗΙΚΜΦΫΨΩάΝ¬ΟΡ≈Τ«»… ΥΧΆΈœ–―“”‘’÷ΉΊΌΎέήίόΏύαβψδεφγηιξκλμνοπώρστθωςχυζϊϋΐΰ�"
+    "chars": "Ĺ²É³ÖÜ΅àâä΄¨çéèê룙î‰ôö¦­ùûü†ΓΔΘΛΞΠß®©ΣΪ§≠°·Α±≤≥¥ΒΕΖΗΙΚΜΦΫΨΩάΝ¬ΟΡ≈Τ«»… ΥΧΆΈœ–―“”‘’÷ΉΊΌΎέήίόΏύαβψδεφγηιξκλµνοπώρστθωςχυζϊϋΐΰ�"
   },
   "maciceland": {
     "type": "_sbcs",

analyses-snapshot-testing/files/protocols/Flex_S_v2_20_8_None_SINGLE_TubeRackCollision.py

@@ -59,7 +59,7 @@ def run(protocol):
 
     pipette.pick_up_tip()
     comment_tip_rack_status(protocol, partial_tip_rack)
-    # can the flex_8channel_50 with 50μl tips really reach the bottom of the tube?
+    # can the flex_8channel_50 with 50µl tips really reach the bottom of the tube?
     pipette.aspirate(30, tube_rack["A1"].bottom())
     pipette.dispense(30, tube_rack["A2"].bottom())
     pipette.drop_tip()

analyses-snapshot-testing/files/protocols/Flex_X_v2_18_NO_PIPETTES_ReservedWord.py

@@ -17,7 +17,7 @@ def add_parameters(parameters):
         minimum=1,
         maximum=12,
         description="description text",
-        unit="μl",
+        unit="µl",
     )
 
 

api/docs/v1/pipettes.rst

@@ -55,12 +55,12 @@ same behavior as before.
 The P20 Single GEN2 is back-compatible with the P10 Single in this regard. If your protocol
 specifies an ``instruments.P10_Single`` and your robot has an ``instruments.P20_Single_GEN2``
 attached, you can run your protocol, and the robot will act as if the maximum volume of the P20
-Single GEN2 is 10 μl.
+Single GEN2 is 10 µl.
 
 If you have a P50 Single specified in your protocol, there is no automatic backwards compatibility.
 If you want to use a Gen2 Pipette, you must change your protocol to load either a P300 Single GEN2
-(if you are using volumes between 20 and 50 μl) or a P20 Single GEN2 (if you are using volumes
-below 20 μl).
+(if you are using volumes between 20 and 50 µl) or a P20 Single GEN2 (if you are using volumes
+below 20 µl).
 
 
 Plunger Flow Rates
@@ -99,92 +99,92 @@ The given defaults for every pipette model is the following:
 P10_Single
 ----------
 
-- Aspirate Default: 5 μl/s
-- Dispense Default: 10 μl/s
-- Blow Out Default: 1000 μl/s
-- Minimum Volume: 1 μl
-- Maximum Volume: 10 μl
+- Aspirate Default: 5 µl/s
+- Dispense Default: 10 µl/s
+- Blow Out Default: 1000 µl/s
+- Minimum Volume: 1 µl
+- Maximum Volume: 10 µl
 
 P10_Multi
 ---------
 
-- Aspirate Default: 5 μl/s
-- Dispense Default: 10 μl/s
-- Blow Out Default: 1000 μl/s
-- Minimum Volume: 1 μl
-- Maximum Volume: 10 μl
+- Aspirate Default: 5 µl/s
+- Dispense Default: 10 µl/s
+- Blow Out Default: 1000 µl/s
+- Minimum Volume: 1 µl
+- Maximum Volume: 10 µl
 
 P50_Single
 ----------
 
-- Aspirate Default: 25 μl/s
-- Dispense Default: 50 μl/s
-- Blow Out Default: 1000 μl/s
-- Minimum Volume: 5 μl
-- Maximum Volume: 50 μl
+- Aspirate Default: 25 µl/s
+- Dispense Default: 50 µl/s
+- Blow Out Default: 1000 µl/s
+- Minimum Volume: 5 µl
+- Maximum Volume: 50 µl
 
 P50_Multi
 ---------
 
-- Aspirate Default: 25 μl/s
-- Dispense Default: 50 μl/s
-- Blow Out Default: 1000 μl/s
-- Minimum Volume: 5 μl
-- Maximum Volume: 50 μl
+- Aspirate Default: 25 µl/s
+- Dispense Default: 50 µl/s
+- Blow Out Default: 1000 µl/s
+- Minimum Volume: 5 µl
+- Maximum Volume: 50 µl
 
 P300_Single
 -----------
 
-- Aspirate Default: 150 μl/s
-- Dispense Default: 300 μl/s
-- Blow Out Default: 1000 μl/s
-- Minimum Volume: 30 μl
-- Maximum Volume: 300 μl
+- Aspirate Default: 150 µl/s
+- Dispense Default: 300 µl/s
+- Blow Out Default: 1000 µl/s
+- Minimum Volume: 30 µl
+- Maximum Volume: 300 µl
 
 P300_Multi
 ----------
 
-- Aspirate Default: 150 μl/s
-- Dispense Default: 300 μl/s
-- Blow Out Default: 1000 μl/s
-- Minimum Volume: 30 μl
-- Maximum Volume: 300 μl
+- Aspirate Default: 150 µl/s
+- Dispense Default: 300 µl/s
+- Blow Out Default: 1000 µl/s
+- Minimum Volume: 30 µl
+- Maximum Volume: 300 µl
 
 P1000_Single
 ------------
 
-- Aspirate Default: 500 μl/s
-- Dispense Default: 1000 μl/s
-- Blow Out Default: 1000 μl/s
-- Minimum Volume: 100 μl
-- Maximum Volume: 1000 μl
+- Aspirate Default: 500 µl/s
+- Dispense Default: 1000 µl/s
+- Blow Out Default: 1000 µl/s
+- Minimum Volume: 100 µl
+- Maximum Volume: 1000 µl
 
 P20_Single_GEN2
 ---------------
 
-- Aspirate Default: 3.78 μl/s
-- Dispense Default: 3.78 μl/s
-- Blow Out Default: 3.78 μl/s
-- Minimum Volume: 1 μl
-- Maximum Volume: 20 μl
+- Aspirate Default: 3.78 µl/s
+- Dispense Default: 3.78 µl/s
+- Blow Out Default: 3.78 µl/s
+- Minimum Volume: 1 µl
+- Maximum Volume: 20 µl
 
 P300_Single_GEN2
 ----------------
 
-- Aspirate Default: 46.43 μl/s
-- Dispense Default: 46.43 μl/s
-- Blow Out Default: 46.43 μl/s
-- Minimum Volume: 20 μl
-- Maximum Volume: 300 μl
+- Aspirate Default: 46.43 µl/s
+- Dispense Default: 46.43 µl/s
+- Blow Out Default: 46.43 µl/s
+- Minimum Volume: 20 µl
+- Maximum Volume: 300 µl
 
 P1000_Single_GEN2
 -----------------
 
-- Aspirate Default: 137.35 μl/s
-- Dispense Default: 137.35 μl/s
-- Blow Out Default: 137.35 μl/s
-- Minimum Volume: 100 μl
-- Maximum Volume: 1000 μl
+- Aspirate Default: 137.35 µl/s
+- Dispense Default: 137.35 µl/s
+- Blow Out Default: 137.35 µl/s
+- Minimum Volume: 100 µl
+- Maximum Volume: 1000 µl
 
 Old Pipette Constructor
 =======================

api/docs/v2/complex_commands/parameters.rst

@@ -62,7 +62,7 @@ One reason to set ``new_tip="always"`` is to avoid cross-contamination between w
 
 :py:meth:`~.InstrumentContext.transfer` will pick up a new tip before *every* aspirate when ``new_tip="always"``. This includes when :ref:`tip refilling <complex-tip-refilling>` requires multiple aspirations from a single source well.
 
-:py:meth:`~.InstrumentContext.distribute` and :py:meth:`~.InstrumentContext.consolidate` only pick up one tip, even when ``new_tip="always"``. For example, this distribute command returns to the source well a second time, because the amount to be distributed (400 µL total plus disposal volume) exceeds the pipette capacity (300 μL)::
+:py:meth:`~.InstrumentContext.distribute` and :py:meth:`~.InstrumentContext.consolidate` only pick up one tip, even when ``new_tip="always"``. For example, this distribute command returns to the source well a second time, because the amount to be distributed (400 µL total plus disposal volume) exceeds the pipette capacity (300 µL)::
 
     pipette.distribute(
         volume=200,

api/docs/v2/modules/temperature_module.rst

@@ -98,11 +98,11 @@ The Temperature Module supports these 96-well block and labware combinations for
 
    * - 96-well block contents
      - API Load Name
-   * - Bio-Rad well plate 200 μL
+   * - Bio-Rad well plate 200 µL
      - ``opentrons_96_aluminumblock_biorad_wellplate_200uL``
-   * - Generic PCR strip 200 μL
+   * - Generic PCR strip 200 µL
      - ``opentrons_96_aluminumblock_generic_pcr_strip_200uL``
-   * - NEST well plate 100 μL
+   * - NEST well plate 100 µL
      - ``opentrons_96_aluminumblock_nest_wellplate_100uL``
 
 This command loads the same physical adapter and labware as the example in the Standalone Adapters section above, but it is also compatible with earlier API versions::

api/docs/v2/tutorial.rst

@@ -30,7 +30,7 @@ Hardware and Labware
 
 Before running a protocol, you’ll want to have the right kind of hardware and labware ready for your Flex or OT-2.
 
-- **Flex users** should review Chapter 2: Installation and Relocation in the `instruction manual <https://insights.opentrons.com/hubfs/Products/Flex/Opentrons%20Flex%20Manual.pdf>`_. Specifically, see the pipette information in the "Instrument Installation and Calibration" section. You can use either a 1-channel or 8-channel pipette for this tutorial. Most Flex code examples will use a `Flex 1-Channel 1000 μL pipette <https://shop.opentrons.com/opentrons-flex-1-channel-pipette/>`_.
+- **Flex users** should review Chapter 2: Installation and Relocation in the `instruction manual <https://insights.opentrons.com/hubfs/Products/Flex/Opentrons%20Flex%20Manual.pdf>`_. Specifically, see the pipette information in the "Instrument Installation and Calibration" section. You can use either a 1-channel or 8-channel pipette for this tutorial. Most Flex code examples will use a `Flex 1-Channel 1000 µL pipette <https://shop.opentrons.com/opentrons-flex-1-channel-pipette/>`_.
 
 - **OT-2 users** should review the robot setup and pipette information on the `Get Started page <https://support.opentrons.com/s/ot2-get-started>`_. Specifically, see `attaching pipettes <https://support.opentrons.com/s/article/Get-started-Attach-pipettes>`_ and `initial calibration <https://support.opentrons.com/s/article/Get-started-Calibrate-the-deck>`_. You can use either a single-channel or 8-channel pipette for this tutorial. Most OT-2 code examples will use a `P300 Single-Channel GEN2 <https://shop.opentrons.com/single-channel-electronic-pipette-p20/>`_ pipette.
 

api/tests/opentrons/protocol_engine/resources/test_pipette_data_provider.py

@@ -94,7 +94,7 @@ def test_configure_virtual_pipette_for_volume(
     )
     assert result1 == LoadedStaticPipetteData(
         model="p50_single_v3.6",
-        display_name="Flex 1-Channel 50 μL",
+        display_name="Flex 1-Channel 50 µL",
         min_volume=5,
         max_volume=50.0,
         channels=1,
@@ -128,7 +128,7 @@ def test_configure_virtual_pipette_for_volume(
     )
     assert result2 == LoadedStaticPipetteData(
         model="p50_single_v3.6",
-        display_name="Flex 1-Channel 50 μL",
+        display_name="Flex 1-Channel 50 µL",
         min_volume=1,
         max_volume=30,
         channels=1,

app/src/local-resources/instruments/__tests__/hooks.test.ts

@@ -13,8 +13,8 @@ import type { PipetteV2Specs } from '@opentrons/shared-data'
 
 vi.mock('/app/resources/robot-settings/hooks')
 
-const BRANDED_P1000_FLEX_DISPLAY_NAME = 'Flex 1-Channel 1000 μL'
-const ANONYMOUS_P1000_FLEX_DISPLAY_NAME = '1-Channel 1000 μL'
+const BRANDED_P1000_FLEX_DISPLAY_NAME = 'Flex 1-Channel 1000 µL'
+const ANONYMOUS_P1000_FLEX_DISPLAY_NAME = '1-Channel 1000 µL'
 
 const mockP1000V2Specs = {
   $otSharedSchema: '#/pipette/schemas/2/pipetteGeometrySchema.json',

app/src/organisms/ODD/InstrumentMountItem/__tests__/ProtocolInstrumentMountItem.test.tsx

@@ -78,7 +78,7 @@ describe('ProtocolInstrumentMountItem', () => {
     render(props)
     screen.getByText('Left Mount')
     screen.getByText('No data')
-    screen.getByText('Flex 8-Channel 1000 μL')
+    screen.getByText('Flex 8-Channel 1000 µL')
     screen.getByText('Attach')
     fireEvent.click(screen.getByRole('button'))
     screen.getByText('pipette wizard flow')
@@ -91,7 +91,7 @@ describe('ProtocolInstrumentMountItem', () => {
     render(props)
     screen.getByText('Left + Right Mount')
     screen.getByText('No data')
-    screen.getByText('Flex 96-Channel 1000 μL')
+    screen.getByText('Flex 96-Channel 1000 µL')
     screen.getByText('Attach')
   })
   it('renders the correct information when there is a pipette attached with cal data', () => {
@@ -103,7 +103,7 @@ describe('ProtocolInstrumentMountItem', () => {
     render(props)
     screen.getByText('Left Mount')
     screen.getByText('Calibrated')
-    screen.getByText('Flex 8-Channel 1000 μL')
+    screen.getByText('Flex 8-Channel 1000 µL')
   })
   it('renders the pipette with no cal data and the calibration button and clicking on it launches the correct flow', () => {
     props = {
@@ -119,7 +119,7 @@ describe('ProtocolInstrumentMountItem', () => {
     render(props)
     screen.getByText('Left Mount')
     screen.getByText('No data')
-    screen.getByText('Flex 8-Channel 1000 μL')
+    screen.getByText('Flex 8-Channel 1000 µL')
     const button = screen.getByText('Calibrate')
     fireEvent.click(button)
     screen.getByText('pipette wizard flow')
@@ -132,7 +132,7 @@ describe('ProtocolInstrumentMountItem', () => {
     render(props)
     screen.getByText('Left Mount')
     screen.getByText('No data')
-    screen.getByText('Flex 8-Channel 1000 μL')
+    screen.getByText('Flex 8-Channel 1000 µL')
     const button = screen.getByText('Attach')
     fireEvent.click(button)
     screen.getByText('pipette wizard flow')

app/src/organisms/PipetteWizardFlows/__tests__/AttachProbe.test.tsx

@@ -133,7 +133,7 @@ describe('AttachProbe', () => {
       isRobotMoving: true,
     }
     render(props)
-    screen.getByText('Stand back, Flex 1-Channel 1000 μL is calibrating')
+    screen.getByText('Stand back, Flex 1-Channel 1000 µL is calibrating')
     screen.getByText(
       'The calibration probe will touch the sides of the calibration square in slot C2 to determine its exact position.'
     )
@@ -152,7 +152,7 @@ describe('AttachProbe', () => {
       isRobotMoving: true,
     }
     render(props)
-    screen.getByText('Stand back, Flex 96-Channel 1000 μL is calibrating')
+    screen.getByText('Stand back, Flex 96-Channel 1000 µL is calibrating')
     screen.getByText(
       'The calibration probe will touch the sides of the calibration square in slot C2 to determine its exact position.'
     )

app/src/organisms/PipetteWizardFlows/__tests__/BeforeBeginning.test.tsx

@@ -191,7 +191,7 @@ describe('BeforeBeginning', () => {
       screen.getByText(
         'The calibration probe is included with the robot and should be stored on the front pillar of the robot.'
       )
-      screen.getByAltText('Flex 1-Channel 1000 μL')
+      screen.getByAltText('Flex 1-Channel 1000 µL')
       screen.getByText('You will need:')
       screen.getByAltText('Calibration Probe')
       screen.getByAltText('2.5 mm Hex Screwdriver')
@@ -449,7 +449,7 @@ describe('BeforeBeginning', () => {
       )
       screen.getByAltText('2.5 mm Hex Screwdriver')
       screen.getByAltText('Calibration Probe')
-      screen.getByAltText('Flex 96-Channel 1000 μL')
+      screen.getByAltText('Flex 96-Channel 1000 µL')
       screen.getByAltText('96-Channel Mounting Plate')
       screen.getByText(
         'Provided with the robot. Using another size can strip the instruments’s screws.'

app/src/organisms/PipetteWizardFlows/__tests__/ChoosePipette.test.tsx

@@ -151,7 +151,7 @@ describe('ChoosePipette', () => {
     props = { ...props, selectedPipette: NINETY_SIX_CHANNEL }
     render(props)
     screen.getByText(
-      'Detach Flex 1-Channel 1000 μL and Attach 96-Channel pipette'
+      'Detach Flex 1-Channel 1000 µL and Attach 96-Channel pipette'
     )
   })
 
@@ -164,7 +164,7 @@ describe('ChoosePipette', () => {
     props = { ...props, selectedPipette: NINETY_SIX_CHANNEL }
     render(props)
     screen.getByText(
-      'Detach Flex 1-Channel 1000 μL and Attach 96-Channel pipette'
+      'Detach Flex 1-Channel 1000 µL and Attach 96-Channel pipette'
     )
   })
 })